Concentration

Ratio of part of a mixture to the whole
Test tubes with liquid in which a blue dye is dissolved in different concentrations. In the test tube with dark blue liquid (in front), the blue dye is dissolved in a high concentration. In the following test tubes, the blue dye is dissolved in a lower concentration (and at the same time in a smaller amount, since the volume is approximately the same). Image is AI generated.

In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture. Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration.[1] The concentration can refer to any kind of chemical mixture, but most frequently refers to solutes and solvents in solutions. The molar (amount) concentration has variants, such as normal concentration and osmotic concentration. Dilution is reduction of concentration, e.g. by adding solvent to a solution. The verb to concentrate means to increase concentration, the opposite of dilute.

Etymology

Concentration-, concentratio, action or an act of coming together at a single place, bringing to a common center, was used in post-classical Latin in 1550 or earlier, similar terms attested in Italian (1589), Spanish (1589), English (1606), French (1632).[2]

Qualitative description

These glasses containing red dye demonstrate qualitative changes in concentration. The solutions on the left are more dilute, compared to the more concentrated solutions on the right.

Often in informal, non-technical language, concentration is described in a qualitative way, through the use of adjectives such as "dilute" for solutions of relatively low concentration and "concentrated" for solutions of relatively high concentration. To concentrate a solution, one must add more solute (for example, alcohol), or reduce the amount of solvent (for example, water). By contrast, to dilute a solution, one must add more solvent, or reduce the amount of solute. Unless two substances are miscible, there exists a concentration at which no further solute will dissolve in a solution. At this point, the solution is said to be saturated. If additional solute is added to a saturated solution, it will not dissolve, except in certain circumstances, when supersaturation may occur. Instead, phase separation will occur, leading to coexisting phases, either completely separated or mixed as a suspension. The point of saturation depends on many variables, such as ambient temperature and the precise chemical nature of the solvent and solute.

Concentrations are often called levels, reflecting the mental schema of levels on the vertical axis of a graph, which can be high or low (for example, "high serum levels of bilirubin" are concentrations of bilirubin in the blood serum that are greater than normal).

Quantitative notation

There are four quantities that describe concentration:

Mass concentration

The mass concentration ρ i {\displaystyle \rho _{i}} is defined as the mass of a constituent m i {\displaystyle m_{i}} divided by the volume of the mixture V {\displaystyle V} :

ρ i = m i V . {\displaystyle \rho _{i}={\frac {m_{i}}{V}}.}

The SI unit is kg/m3 (equal to g/L).

Molar concentration

The molar concentration c i {\displaystyle c_{i}} is defined as the amount of a constituent n i {\displaystyle n_{i}} (in moles) divided by the volume of the mixture V {\displaystyle V} :

c i = n i V . {\displaystyle c_{i}={\frac {n_{i}}{V}}.}

The SI unit is mol/m3. However, more commonly the unit mol/L (= mol/dm3) is used.

Number concentration

The number concentration C i {\displaystyle C_{i}} is defined as the number of entities of a constituent N i {\displaystyle N_{i}} in a mixture divided by the volume of the mixture V {\displaystyle V} :

C i = N i V . {\displaystyle C_{i}={\frac {N_{i}}{V}}.}

The SI unit is 1/m3.

Volume concentration

The volume concentration σ i {\displaystyle \sigma _{i}} (not to be confused with volume fraction[3]) is defined as the volume of a constituent V i {\displaystyle V_{i}} divided by the volume of the mixture V {\displaystyle V} :

σ i = V i V . {\displaystyle \sigma _{i}={\frac {V_{i}}{V}}.}

Being dimensionless, it is expressed as a number, e.g., 0.18 or 18%; its unit is 1.

There seems to be no standard notation in the English literature. The letter σ i {\displaystyle \sigma _{i}} used here is normative in German literature (see Volumenkonzentration).

Related quantities

Several other quantities can be used to describe the composition of a mixture. These should not be called concentrations.[1]

Normality

Normality is defined as the molar concentration c i {\displaystyle c_{i}} divided by an equivalence factor f e q {\displaystyle f_{\mathrm {eq} }} . Since the definition of the equivalence factor depends on context (which reaction is being studied), the International Union of Pure and Applied Chemistry and National Institute of Standards and Technology discourage the use of normality.

Molality

The molality of a solution b i {\displaystyle b_{i}} is defined as the amount of a constituent n i {\displaystyle n_{i}} (in moles) divided by the mass of the solvent m s o l v e n t {\displaystyle m_{\mathrm {solvent} }} (not the mass of the solution):

b i = n i m s o l v e n t . {\displaystyle b_{i}={\frac {n_{i}}{m_{\mathrm {solvent} }}}.}

The SI unit for molality is mol/kg.

Mole fraction

The mole fraction x i {\displaystyle x_{i}} is defined as the amount of a constituent n i {\displaystyle n_{i}} (in moles) divided by the total amount of all constituents in a mixture n t o t {\displaystyle n_{\mathrm {tot} }} :

x i = n i n t o t . {\displaystyle x_{i}={\frac {n_{i}}{n_{\mathrm {tot} }}}.}

The SI unit is mol/mol. However, the deprecated parts-per notation is often used to describe small mole fractions.

Mole ratio

The mole ratio r i {\displaystyle r_{i}} is defined as the amount of a constituent n i {\displaystyle n_{i}} divided by the total amount of all other constituents in a mixture:

r i = n i n t o t n i . {\displaystyle r_{i}={\frac {n_{i}}{n_{\mathrm {tot} }-n_{i}}}.}

If n i {\displaystyle n_{i}} is much smaller than n t o t {\displaystyle n_{\mathrm {tot} }} , the mole ratio is almost identical to the mole fraction.

The SI unit is mol/mol. However, the deprecated parts-per notation is often used to describe small mole ratios.

Mass fraction

The mass fraction w i {\displaystyle w_{i}} is the fraction of one substance with mass m i {\displaystyle m_{i}} to the mass of the total mixture m t o t {\displaystyle m_{\mathrm {tot} }} , defined as:

w i = m i m t o t . {\displaystyle w_{i}={\frac {m_{i}}{m_{\mathrm {tot} }}}.}

The SI unit is kg/kg. However, the deprecated parts-per notation is often used to describe small mass fractions.

Mass ratio

The mass ratio ζ i {\displaystyle \zeta _{i}} is defined as the mass of a constituent m i {\displaystyle m_{i}} divided by the total mass of all other constituents in a mixture:

ζ i = m i m t o t m i . {\displaystyle \zeta _{i}={\frac {m_{i}}{m_{\mathrm {tot} }-m_{i}}}.}

If m i {\displaystyle m_{i}} is much smaller than m t o t {\displaystyle m_{\mathrm {tot} }} , the mass ratio is almost identical to the mass fraction.

The SI unit is kg/kg. However, the deprecated parts-per notation is often used to describe small mass ratios.

Dependence on volume and temperature

Concentration depends on the variation of the volume of the solution with temperature, due mainly to thermal expansion.

Table of concentrations and related quantities

Concentration type Symbol Definition SI unit other unit(s)
mass concentration ρ i {\displaystyle \rho _{i}} or γ i {\displaystyle \gamma _{i}} m i / V {\displaystyle m_{i}/V} kg/m3 g/100mL (= g/dL)
molar concentration c i {\displaystyle c_{i}} n i / V {\displaystyle n_{i}/V} mol/m3 M (= mol/L)
number concentration C i {\displaystyle C_{i}} N i / V {\displaystyle N_{i}/V} 1/m3 1/cm3
volume concentration σ i {\displaystyle \sigma _{i}} V i / V {\displaystyle V_{i}/V} m3/m3
Related quantities Symbol Definition SI unit other unit(s)
normality c i / f e q {\displaystyle c_{i}/f_{\mathrm {eq} }} mol/m3 M (= mol/L)
molality b i {\displaystyle b_{i}} n i / m s o l v e n t {\displaystyle n_{i}/m_{\mathrm {solvent} }} mol/kg m
mole fraction x i {\displaystyle x_{i}} n i / n t o t {\displaystyle n_{i}/n_{\mathrm {tot} }} mol/mol ppm, ppb, ppt
mole ratio r i {\displaystyle r_{i}} n i / ( n t o t n i ) {\displaystyle n_{i}/(n_{\mathrm {tot} }-n_{i})} mol/mol ppm, ppb, ppt
mass fraction w i {\displaystyle w_{i}} m i / m t o t {\displaystyle m_{i}/m_{\mathrm {tot} }} kg/kg ppm, ppb, ppt
mass ratio ζ i {\displaystyle \zeta _{i}} m i / ( m t o t m i ) {\displaystyle m_{i}/(m_{\mathrm {tot} }-m_{i})} kg/kg ppm, ppb, ppt
volume fraction ϕ i {\displaystyle \phi _{i}} V i / j V j {\displaystyle V_{i}/\sum _{j}V_{j}} m3/m3 ppm, ppb, ppt

See also

References

  1. ^ a b IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "concentration". doi:10.1351/goldbook.C01222
  2. ^ "concentration". Oxford English Dictionary (Online ed.). Oxford University Press. (Subscription or participating institution membership required.)
  3. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "volume fraction". doi:10.1351/goldbook.V06643

External links

  • Media related to Concentration (chemistry) at Wikimedia Commons
  • v
  • t
  • e
Chemical solutions
SolutionConcentration
and related quantitiesSolubilitySolvent
Authority control databases: National Edit this at Wikidata
  • Germany