Dual Air Density Explorer
NASA satellite of the Explorer program
 Explorer (56) (DADE-A) satellite | |
| Names | DADE-A Dual Air Density Explorer-A |
|---|---|
| Mission type | Earth science |
| Operator | NASA |
| COSPAR ID | 1975-DADE-A |
| Mission duration | Failed to orbit |
| Spacecraft properties | |
| Spacecraft | Explorer LVI |
| Spacecraft type | Dual Air Density Explorer |
| Bus | DADE |
| Manufacturer | Langley Research Center |
| Launch mass | 40 kg (88 lb) |
| Power | Solar cells and batteries |
| Start of mission | |
| Launch date | 6 December 1975, 03:35:01 UTC[1] |
| Rocket | Scout F-1 (S-196C) |
| Launch site | Vandenberg, SLC-5 |
| Contractor | Vought |
| End of mission | |
| Deactivated | Failed to orbit |
| Orbital parameters | |
| Reference system | Geocentric orbit (planned) |
| Regime | Polar orbit |
| Perigee altitude | 350 km (220 mi) |
| Apogee altitude | 350 km (220 mi) |
| Inclination | 90.10° |
| Period | 90.00 minutes |
| Instruments | |
| Atmospheric Composition Mass Spectrometer Atmospheric Drag Density | |
Explorer program ← Explorer 55 Explorer 57 → | |
Dual Air Density Explorer was a set of 2 satellites, DADE-A and DADE-B, released as part of NASA's Explorer program. DADE-A and DADE-B was launched on 6 December 1975 at 03:35:01 UTC,[1] by a Scout F-1 launch vehicle from Space Launch Complex 5, Vandenberg Air Force Base, California. The launch of the DADE satellites failed.[2][3]
Spacecraft
The Dual Air Density Explorer-A (DADE-A) satellite was a 76 cm (30 in) rigid sphere designed to determine, in conjunction with Dual Air Density Explorer-B (DADE-B), the vertical structure of the upper thermosphere and the lower exosphere as a function of latitude, season, and local solar time. Both satellites would have been launched by a single Scout launch vehicle into coplanar polar orbits. Measurements of atmospheric density from DADE-A would have been obtained from satellite drag analyses near perigee (approximately 350 km (220 mi)) and from composition measurements taken by an onboard mass spectrometer. DADE-A was equipped with a radio beacon to facilitate tracking.[2]
Experiments
Atmospheric Composition Mass Spectrometer
The mass spectrometer experiment on DADE-A was designed to perform composition measurements in the upper thermosphere (approximately 350 km (220 mi)). The instrument was a magnetic mass spectrometer with a Mattauch-Herzog geometry and would have measured the distribution of such atmospheric constituents as oxygen, nitrogen, helium, hydrogen, neon and argon.[4]
Atmospheric Drag Density
The atmospheric drag density experiment on DADE-A was designed to provide indirect measurements of upper thermospheric density near satellite perigee (approximately 350 km (220 mi)). The experiment had no unique onboard hardware. The density values would have been derived from sequential observations of the satellite's position. The experiment would have yielded systematic values of atmospheric density as a function of latitude, season, and local solar time.[5]
See also
Spaceflight portal
References
- ^ a b "Launch Log". Jonathan's Space Report. 21 July 2021. Retrieved 19 November 2021.
- ^ a b "Display: DADE-A". NASA. 28 October 2021. Retrieved 19 November 2021.
This article incorporates text from this source, which is in the public domain. - ^ "Display: DADE-B". NASA. 28 October 2021. Retrieved 19 November 2021. This article incorporates text from this source, which is in the public domain.
- ^ "Experiment: Atmospheric Composition Mass Spectrometer". NASA. 28 October 2021. Retrieved 19 November 2021. This article incorporates text from this source, which is in the public domain.
- ^ "Experiment: Atmospheric Drag Density". NASA. 28 October 2021. Retrieved 19 November 2021. This article incorporates text from this source, which is in the public domain.
External links
- DADE A
- v
- t
- e
| Proposals |
|---|
- Green titles indicates active current missions
- Grey titles indicates cancelled missions
- Italics indicate missions yet to launch
- Symbol † indicates failure en route or before intended mission data returned
