Voltage-gated sodium channel

Voltage-gated sodium channels (VGSCs), also known as voltage-dependent sodium channels (VDSCs), are a group of voltage-gated ion channels found in the membrane of excitable cells (e.g., muscle, glial cells, neurons, etc.) with a permeability to the sodium ion Na⁺. They are the main channels involved in action potential of excitable cells.

Structure

Sodium channels consist of large alpha subunits that associate with accessory proteins, such as beta subunits. An alpha subunit forms the core of the channel and is functional on its own. When the alpha subunit protein is expressed by a cell, it is able to form a pore in the cell membrane that conducts Na⁺ in a voltage-dependent way, even if beta subunits or other known modulating proteins are not expressed. When accessory proteins assemble with α subunits, the resulting complex can display altered voltage dependence and cellular localization.

The alpha subunit consists of four repeat domains, labelled I through IV, each containing six membrane-spanning segments, labelled S1 through S6. The highly conserved S4 segment acts as the channel's voltage sensor. The voltage sensitivity of this channel is due to positive amino acids located at every third position.^[2] When stimulated by a change in transmembrane voltage, this segment moves toward the extracellular side of the cell membrane, allowing the channel to become permeable to ions. The ions are conducted through the central pore cavity, which consists of two main regions. The more external (i.e., more extracellular) portion of the pore is formed by the "P-loops" (the region between S5 and S6) of the four domains. This region is the most narrow part of the pore and is responsible for its ion selectivity. The inner portion (i.e., more cytoplasmic) of the pore is the pore gate and is formed by the combined S5 and S6 segments of the four domains. The pore domain also features lateral tunnels or fenestrations that run perpendicular to the pore axis. These fenestrations that connect the central cavity to the membrane are proposed to be important for drug accessibility.^[3][4][5]

In mammalian sodium channels, the region linking domains III and IV is also important for channel function. This DIII-IV linker is responsible for wedging the pore gate shut after channel opening, inactivating it.^[6]

Gating

Voltage-gated Na⁺ channels have three main conformational states: closed, open and inactivated. Forward/back transitions between these states are correspondingly referred to as activation/deactivation (between open and closed, respectively), inactivation/reactivation (between inactivated and open, respectively), and recovery from inactivation/closed-state inactivation (between inactivated and closed, respectively). Closed and inactivated states are ion impermeable.

Before an action potential occurs, the axonal membrane is at its normal resting potential, about −70 mV in most human neurons, and Na⁺ channels are in their deactivated state, blocked on the extracellular side by their activation gates. In response to an increase of the membrane potential to about −55 mV (in this case, caused by an action potential), the activation gates open, allowing positively charged Na⁺ ions to flow into the neuron through the channels, and causing the voltage across the neuronal membrane to increase to +30 mV in human neurons. Because the voltage across the membrane is initially negative, as its voltage increases to and past zero (from −70 mV at rest to a maximum of +30 mV), it is said to depolarize. This increase in voltage constitutes the rising phase of an action potential.

At the peak of the action potential, when enough Na⁺ has entered the neuron and the membrane's potential has become high enough, the Na⁺ channels inactivate themselves by closing their inactivation gates. The inactivation gate can be thought of as a "plug" tethered to domains III and IV of the channel's intracellular alpha subunit. Closure of the inactivation gate causes Na⁺ flow through the channel to stop, which in turn causes the membrane potential to stop rising. The closing of the inactivation gate creates a refractory period within each individual Na⁺ channel. This refractory period eliminates the possibility of an action potential moving in the opposite direction back towards the soma. With its inactivation gate closed, the channel is said to be inactivated. With the Na⁺ channel no longer contributing to the membrane potential, the potential decreases back to its resting potential as the neuron repolarizes and subsequently hyperpolarizes itself, and this constitutes the falling phase of an action potential. The refractory period of each channel is therefore vital in propagating the action potential unidirectionally down an axon for proper communication between neurons.

When the membrane's voltage becomes low enough, the inactivation gate reopens and the activation gate closes in a process called deinactivation. With the activation gate closed and the inactivation gate open, the Na⁺ channel is once again in its deactivated state, and is ready to participate in another action potential.

When any kind of ion channel does not inactivate itself, it is said to be persistently (or tonically) active. Some kinds of ion channels are naturally persistently active. However, genetic mutations that cause persistent activity in other channels can cause disease by creating excessive activity of certain kinds of neurons. Mutations that interfere with Na⁺ channel inactivation can contribute to cardiovascular diseases or epileptic seizures by window currents, which can cause muscle and/or nerve cells to become over-excited.

Modeling the behavior of gates

The temporal behavior of Na⁺ channels can be modeled by a Markovian scheme or by the Hodgkin–Huxley-type formalism. In the former scheme, each channel occupies a distinct state with differential equations describing transitions between states; in the latter, the channels are treated as a population that are affected by three independent gating variables. Each of these variables can attain a value between 1 (fully permeant to ions) and 0 (fully non-permeant), the product of these variables yielding the percentage of conducting channels. The Hodgkin–Huxley model can be shown to be equivalent to a Markovian model.^{[further explanation needed]}

Impermeability to other ions

The pore of sodium channels contains a selectivity filter made of negatively charged amino acid residues, which attract the positive Na⁺ ion and keep out negatively charged ions such as chloride. The cations flow into a more constricted part of the pore that is 0.3 by 0.5 nm wide, which is just large enough to allow a single Na⁺ ion with a water molecule associated to pass through. The larger K⁺ ion cannot fit through this area. Ions of different sizes also cannot interact as well with the negatively charged glutamic acid residues that line the pore. ^{[citation needed]}

Diversity

Voltage-gated sodium channels normally consist of an alpha subunit that forms the ion conduction pore and one to two beta subunits that have several functions including modulation of channel gating.^[7] Expression of the alpha subunit alone is sufficient to produce a functional channel.

Alpha subunits

The family of sodium channels has 9 known members, with amino acid identity >50% in the trans-membrane segments and extracellular loop regions. A standardized nomenclature for sodium channels is currently used and is maintained by the IUPHAR.^[8]

The proteins of these channels are named Na_v1.1 through Na_v1.9. The gene names are referred to as SCN1A through SCN5A, then SCN8A through SCN11A.^[8] The "tenth member", Na_x, does not act in a voltage-gated way. It has a loosely similar overall structure. Not much is known about its real function, other than that it also associates with beta subunits.^[9]

The probable evolutionary relationship between these channels, based on the similarity of their amino acid sequences, is shown in figure 1. The individual sodium channels are distinguished not only by differences in their sequence but also by their kinetics and expression profiles. Some of this data is summarized in table 1, below.

Beta subunits

Sodium channel beta subunits are type 1 transmembrane glycoproteins with an extracellular N-terminus and a cytoplasmic C-terminus. As members of the Ig superfamily, beta subunits contain a prototypic V-set Ig loop in their extracellular domain. They do not share any homology with their counterparts of calcium and potassium channels.^[18] Instead, they are homologous to neural cell adhesion molecules (CAMs) and the large family of L1 CAMs. There are four distinct betas named in order of discovery: SCN1B, SCN2B, SCN3B, SCN4B (table 2). Beta 1 and beta 3 interact with the alpha subunit non-covalently, whereas beta 2 and beta 4 associate with alpha via disulfide bond.^[19] Sodium channels are more likely to stay open at the subthreshold membrane potential when interacting with beta toxins, which in turn induces an immediate sensation of pain.^[20]

Role of beta subunits as cell adhesion molecules

In addition to regulating channel gating, sodium channel beta subunits also modulate channel expression and form links to the intracellular cytoskeleton via ankyrin and spectrin.^[7][21][22] Voltage-gated sodium channels also assemble with a variety of other proteins, such as FHF proteins (Fibroblast growth factor Homologous Factor), calmodulin, cytoskeleton or regulatory kinases,^{[23][7][24][25][26]} which form a complex with sodium channels, influencing its expression and/or function. Several beta subunits interact with one or more extracellular matrix (ECM) molecules. Contactin, also known as F3 or F11, associates with beta 1 as shown via co-immunoprecipitation.^[27] Fibronectin-like (FN-like) repeats of Tenascin-C and Tenascin-R bind with beta 2 in contrast to the Epidermal growth factor-like (EGF-like) repeats that repel beta2.^[28] A disintegrin and metalloproteinase (ADAM) 10 sheds beta 2's ectodomain possibly inducing neurite outgrowth.^[29] Beta 3 and beta 1 bind to neurofascin at Nodes of Ranvier in developing neurons.^[30]

Evolution

A voltage-gated sodium channel is present in members of the choanoflagellates, thought to be the closest living, unicellular relative of animals.^[32][33] This suggests that an ancestral form of the animal channel was among the many proteins that play central roles in animal life, but which are thought to have evolved before multicellularity.^[34] The four-domain animal voltage-gated sodium channel likely evolved from a single-subunit ion channel, which was probably permeable for potassium ions, via a sequence of two duplication events.^[35] This model draws support from the fact that subunits I and III (and II and IV) group by similarity, suggesting that a two-channel intermediate generated from the first duplication existed long enough for divergence to occur between its two subunits. After the second duplication, the channel was left with two sets of similar domains.^[35] The resulting four-domain channel is thought to have been permeable primarily for calcium, and to have achieved sodium selectivity a number of times independently.^[36][37] After divergence from the invertebrates, the vertebrate lineage underwent two whole-genome duplications (WGDs), yielding a set of four sodium channel gene prologues in the ancestral vertebrate, all of which were retained.^[38][39] After the tetrapod/teleost split, the teleosts likely underwent a third WGD leading to the eight sodium channel prologues expressed in many modern fishes.^[38] The modern, ten-paralogue sodium gene complement of mammals is thought to have arisen from a series of parallel and nested duplications involving two of the four paralogues present in the ancestor of all tetrapods.^[39]

In electric fishes

Several fishes possess an electric organ functioning with voltage-gated sodium channels, allowing them to communicate, immobilize preys or deter predators, depending on the fish. Electric organs used in communication have evolved independently at least twice: in the Gymnotiformes of South America and the Mormyriformes of Africa of Africa.^[40] In non-electric fishes the channels Na_v1.4a and Na_v1.4b are present in the muscles, while in Gymnotiformes and Mormyriformes Na_v1.4a has disapeared in the muscles and is expressed in the electric organ.^[40]

Sources

 This article incorporates text by Maryam Iman, Atefeh Saadabadi, and Asghar Davood available under the CC BY 4.0 license.

References