Tianlong-3

Tianlong-3 (Chinese: 天龙三号; pinyin: Tiānlóng sān hào; lit. 'Sky Dragon 3', TL-3) is a medium-lift orbital launch vehicle developed by the Chinese private aerospace manufacturer Space Pioneer. It is designed to be partially reusable, with the first stage capable of performing an autonomous vertical landing and being reused up to 10 times. Tianlong-3 is part of Space Pioneer's efforts to develop low-cost, reusable launch vehicles to compete in the growing commercial launch market. It aims to provide launch services for medium-sized payloads to low Earth orbit (LEO) and sun-synchronous orbit (SSO).^[1][2][3]

Design

First Stage

The first stage of the Tianlong-3 is equipped with 9 Tianhuo-12 (TH-12) liquid oxygen/kerosene engines. Each engine has a vacuum thrust of 1,350 kN, a vacuum specific impulse of 335 s, a sea-level thrust of 1,090 kN, a sea-level specific impulse of 285 s, a throttling range of 40%~110%, and a thrust-to-weight ratio of 163. The engines utilize a gas generator cycle and feature pump-fed gimbaling.^[2][4]

The first stage propellant tanks have a diameter of 3.8 meters and use the same triangular grid-stiffened shell structure as the 3.35-meter-diameter tanks of the Tianlong-2 first stage.^[4]

Second Stage

The second stage of the Tianlong-3 is equipped with a single vacuum-optimized version of the Tianhuo-12 engine, designated as TH-12V.^[4]

Payload Fairing

The standard payload fairing of the Tianlong-3 has a diameter of 4.2 m, a height of 12 m, and can accommodate payloads with a diameter of up to 3.8 m and a height of up to 10 m. An enhanced version of the fairing, with a diameter of 5.2 m and a height of 14 m, is also available.^[4]

Orbital Insertion Accuracy

The Tianlong-3 is designed to achieve high orbital insertion accuracy, with a semi-major axis deviation of ≤ 5 km, an orbital inclination deviation of ≤ 0.07°, an eccentricity deviation of ≤ 0.003, an attitude angle deviation of ≤ 0.5°, and an attitude angular velocity deviation of ≤ 0.5°/s.^[5]

History

Tianhuo-12 Engine

On July 24, 2023, the Tianhuo-12 (TH-12) engine, designed for the Tianlong-3 rocket, successfully completed a full-duration hot fire test. The test utilized an engine in the flight configuration of the first Tianlong-3 rocket and was conducted at rated conditions for a single burn duration of 100 seconds, accumulating a total test duration of 200 seconds. This test demonstrated that the engine met the flight requirements for the Tianlong-3 rocket.^[6]

In early January 2024, the TH-12 engine completed a calibration hot fire test for the first flight batch. The test, conducted using an engine in the flight configuration of the first Tianlong-3 rocket, subjected the engine to a 50-second process verification test at rated conditions. During the test, the engine demonstrated rapid startup, smooth operation, and normal shutdown.^[7]

Later in January 2024, the TH-12 engine underwent a spot check hot fire test for the first flight batch, fully simulating the flight conditions of the inaugural Tianlong-3 launch. The test involved 6 consecutive ignitions of the engine without removal from the test stand, accumulating a total test duration exceeding 1,000 seconds. Notably, the single engine operating time during the test surpassed the planned flight duration by a factor of 6.^[8]

Maiden Flight

The maiden flight of the Tianlong-3 rocket is scheduled for July 2024, launching from the Wenchang Commercial Spaceport's LC-2 launch complex. The rocket will carry a payload destined for a sun-synchronous orbit (SSO). Although the first stage of the rocket is designed for reusability, it will not be recovered during this inaugural launch.^[9]

Launches

See also

• Comparison of orbital launcher families
• Comparison of orbital launch systems
• Expendable launch system
• Lists of rockets

References